|
|
|
FINGER JOINT MACHINE
|
|
The machine Mod. NG permits to
finger joint two veneer strips,
already lengthwise trimmed.
The finger jointing is obtained by
cutting with knife and counter-knife
purpose-shaped, driven by
hydraulic cylinders.
This unit includes:
- device to insert strip
- two finger cutting units for head
and end strip
- devices for clamping and feeding
strip (input and output)
- device to press and heat
thermoadhesive tape
- wet device for adhesive tape
- automatic motorized unwinding
unit for thermoadhesive tape
|
|
|
Technical data
|
|
NG |
|
Min. veneer width
|
mm |
80 |
|
Max. veneer width
|
mm |
330 |
|
Veneer thickness
|
mm |
0,4÷0,8 |
|
Min. length of the veneer strip
|
mm |
400 |
|
Min. dia. of the roll on machine Mod. NA
|
mm |
200 |
|
Max. dia. of the roll on machine Mod. NA
|
mm |
600 |
|
Connected load
|
HP |
6,8 |
|
Air consumption per cycle
|
dm3 |
0,1 |
|
Compressed air working pressure
|
Mpa (bar) |
0,6÷0,8 (6÷8) |
|
Weight of the machine Mod. NG
|
kg |
1000 |
|
Weight of the machine Mod. NA
|
kg |
400 |
|
Overall plant dimensions
|
mm |
5750x1600x1800 |
|
Data and features are not binding and may be modified and improved.
|
|
|
|
